Analisis Pola Keausan Carbon Strip Pantograf pada Kereta MRT Jakarta
DOI:
https://doi.org/10.54324/jtt.v3i1.24Keywords:
MRT Jakarta, wear rate, carbon strip, life time.Abstract
MRT Jakarta is one of the KRL type railway operators in Indonesia. The reliability of MRT Jakarta facilities must always be considered, the service life of components is also one of the keys to the reliability of the facilities. Carbon strip, as one of the main components in KRL operations, is a component that has a lifespan in use. Thickness measurement is a routine activity in carrying out maintenance of facilities at the depot, if the carbon strip is at its maximum wear, the component must be replaced immediately. However, there is a difference in thickness between the two sides of the carbon strip, which shortens its lifespan. If one side is at its maximum wear, then replacement must be made on both sides. This journal will discuss in detail the factors that cause wear and tear and calculate the wear rate and service life of carbon strips using the forecasting method. So it is necessary to change the maintenance method to be able to increase the service life of the components, so as to reduce maintenance costs in one period of time.
References
Cahyani, O., & Iftadi, I. (2021). Penjadwalan Preventive Maintenance dengan Metode Reliability Centered Maintenance pada Stasiun Cabinet PU di PT IJK. Teknoin, 27(1).
Fath, A., Fajari, R., Arsyad, M. F., & Prasteyo, P. H. (2023). Pengaruh Perawatan Preventif Lifetime Baterai Lead Acid Untuk Persinyalan Kereta Api Listrik Effects of Preventive Maintenance Lifetime Battery Lead Acid for Signaling Electric Train. 2(1), 50–67.
Gohtami, E. (2018). Evaluasi dan eksperimentasi desain modul, pola dan sambungan pada konstruksi bambu dengan sistem pantograf. Universitas Katolik Parahyangan.
Kementerian Perhubungan. (2018). PM 50 Tahun 2018 Perhubungan Tentang Persyaratan Teknis Instalasi Listrik Perkeretaapian. Kementerian Perhubungan Republik Indonesia, 13.
Mentari, R. A., & Hidayat, T. P. (2021). Analisis Performansi Mesin pada Corrective Maintenance dan Preventive Maintenance dengan Menggunakan Metode Modularity Design. Jurnal Ilmiah Teknik Industri (Jurnal Keilmuan Teknik Dan Manajemen Industri), 847–856.
Menteri Perhubungan. (2022). Peraturan Menteri Perhubungan Nomor 7 Tahun 2022 Tentang Penyelenggaraan Kereta Api Kecepatan Tinggi. Kementerian Perhubungan Republik Indonesia, 1–207.
Menteri Perhubungan Republik Indonesia. (2009). No Title PP 56 Tahun 2009 Tentang Penyelenggaraan Perkeretaapian. Kementerian Perhubungan Republik Indonesia, 2(5), 255.
PT Kereta Api Indonesia. (2013). Peraturan Dinas 8B Penggunaan Kereta Rel Listrik Pada Lintas Dengan Jaringan Listrik Aliran Atas 1.500 Volt DC. April.
PT MRT Jakarta. (2022). Seri pembelajaran standar baru pembangunan infrastruktur di indonesia.
Saiful Rifa’i, A., & Prayogi, E. (2021). Analisis Laju Keausan Main Contact Strip Pantograf Kereta PT MRT Jakarta. Jurnal Health Sains, 2(3), 388–398. https://doi.org/10.46799/jsa.v2i3.189
Shafira, R., Gagarin Irianto, C., & Kasim, I. (2022). Analisa Jatuh Tegangan Pada Mass Rapid Transit (Mrt) Jakarta. Jetri : Jurnal Ilmiah Teknik Elektro, 20(1), 14–27. https://doi.org/10.25105/jetri.v20i1.8952
Soleiman, R. (2022). PLANNING FOR EXTENDING THE INTERVAL OF DAILY MAINTENANCE FROM 3 DAYS TO 6 DAYS (STUDY CASE: PT MRT JAKARTA). 5.
Sugiyono. (2018). Teknik Analisis Kualtitatif. Teknik Analisis, 1–7.
Surawan, T., Kurniawati, N., Digdoyo, A., Sujatmika, H., & Agusta, H. (2021). Analisa Pengaruh Pola Operasi Terhadap Laju Keausan Carbon Strip Pada Pantograf. In Jurnal Teknologi (Vol. 9, Issue 1).
Surawan, T., & Mulyadi, D. (2019). Pengaruh Waktu Pembebanan Dan Kecepatan Terhadap Keausan Paduan Tembaga (Cu) Dan Karbon (C). Jurnal Teknologi, 6(2), 71–84.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Fihanas Permada Asia Habby, Adrian Kristanto Tamara, Dahlan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
