Analisis Pola Keausan Brake Shoe pada Kereta Mass Rapid Transit Jakarta
DOI:
https://doi.org/10.54324/jtt.v2i2.25Keywords:
wear, brake shoe, lifetime, electric train, brakingAbstract
Brake shoe is one of the components on train that has an important role in braking process, to perform braking brake shoe rubs against the wheel. Friction between the brake shoe and wheel continuously can cause wear on brake shoe. The purpose of this study is to determine the wear rate and service life of brake shoe and main cause of brake shoe wear faster. The research method used in this research is descriptive quantitative method. Based on the results of the study, at a distance of about 7000 km to 10000 km the brake shoe on trailer car experienced wear of about 4 mm to 8 mm while brake shoe on motor car was about 1 mm to 3 mm. The service life of brake shoe on trailer car when mileage reaches 40000 km to 50000 km while on the motor car it can reach 70000 km to 90000 km and the main cause of brake shoe wear is faster due to the large braking force generated due to the frequent braking of the train so that the friction on the brake shoe and the wheel is more frequent and can cause hot temperatures which make wear occur faster.
References
Abbas, A. (2012). Analisis Gaya Tekan Blok Rem Dengan Metode 2 Slack Adjuster Pada Kereta Penumpang. Jurnal IKRAITH-TEKNOLOGI Vol 7 No 2 Juli 2023
Arisandi, D. Senoaji, A. (2014). Analisis Kegagalan Blok Rem Metalik Kereta Api. Pasca Sarjana ITB.
Apriliani, N. F. Putra, N. H. S. Atmaja, D. S. Aghastya, A. dan Lailiyah, Q. (2022). Analysis of Hardness and Wear Properties of Composite Railway Brake Blocks Using Nylon Fiber Reinforced. ICORT, AER 220, pp. 174–180, https://doi.org/10.2991/978-94-6463-126-5_ 19
Dermawan. Ilmi, B. (2023). Analisis Laju Keausan Brake Pad Terhadap Disc Brake Kereta Listrik LRV Seri 1100. S1 thesis, Universitas Mercu Buana Jakarta.
FTTL. 2023. Materi Perkuliahan: Pengetahuan Dasar Sarana Perkeretaapian. ITL Trisakti.
Gultom, E. dan Kaelani, Y. (2006). Studi Eksperimen dan Analisa Laju Keausan Material Alternatif pada Sepatu Rem Lokomotif. Jurnal Teknik ITS, Vol 5, No 2. DOI: 10.12962/j23373539.v5i2.20765.
Gultom, B. A. dan Syahbuddin (2021). Laju Keausan Sepatu Rem Komposit Pada Kereta Listrik PT MRT Jakarta. Metrik Serial Teknologi dan Sains. Vol.1 No.1
Ginting, M., Sailon, S., Yusuf, M., & Prasetyo, R. A. (2018). Analisa Koefisien Gesek Pelumas Mesin Multi Grade. AUSTENIT, 10(2), 61–66. https://doi.org/10.5281/ zenodo.4547652.
Hardiansyah, I. W. (2021). Penerapan Gaya Gesek Terhadap Kehidupan Manusia. INKUIRI: Jurnal Pendidikan IPA. Vol. 10, No. 1, 2021 (hal 70-73).
PT MRT Jakarta. (2018a). Maintenance Manual of PT MRT Jakarta Chapter 11-Bogie. Jakarta: Sumitomo Corporation
PT MRT Jakarta. (2018b). Maintenance Manual of PT MRT Jakarta Chapter 10- Pneumatic. Jakarta: Sumitomo Corporation.
PT MRT Jakarta, (2018c). Maintenance Manual of PT MRT Jakarta Chapter 01-Carbody. Jakarta: Sumitomo Corporation.
Pemerintah Indonesia. (2007). Undang-Undang Republik Indonesia Nomor 23 Tahun 2007 Tentang Perkeretaapian.
Sugiyono. (2021). Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: Penerbit Alfabeta.
Sasmita, H. H., Nugroho, A., & Sukmadi, T. (2018). Optimasi Penggunaan Sistem Pengereman Regeneratif Dan Pneumatic Pada Kereta Rel Listrik Jabodetabek Menggunakan Metode Particle Swarm Optimization (PSO). Transient, 7(1), 284
Zakaria, L. (2021). Perbandingan Kinerja Jarak Pengereman Blok Rem Berbahan Metalik dan Komposit Pada Kereta Api. Jurnal TEDC, 15(1), 113–124.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Vira Pramadhani Putri, Dahlan, Totok Suryono
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
